602-999-1415

Over the years, we’ve written many, many How To’s for replacing your toilet, finding the leak in your toilet, stopping a running toilet, tightening a loose toilet, and tips for pickign the best toilet for your Gilbert home.

We’ve pretty much covered everything there is to cover with respect to toilets. So, today let’s put it all together into The Ultimate Guide to Toilet Problems…

How To Fix A Leaky Toilet, Plain and Simple Plumbing Solution

A leaky toilet is a superfluous misuse of water. Indeed, even a little dribble can waste gallons of water every day and actually cost you a great deal of money over time.

There is no compelling reason to waste so much water when most leaky toilets can be settled without spending a great deal of cash or time. The most widely recognized issues connected with leaky toilets incorporate the tank fold or the ballcock stomach.

Here, you’ll discover data on the most proficient method to check these parts and replace the piece that is broken.

Finding the broken or exhausted part is the initial step.

Next, you’ll have to kill the water supply to the toilet and flush to deplete out however much water as could be in the tank. This essentially makes it less demanding to work. Remove the broken part and head to the handyman shop. Talk to the hardware plumbing expert about replacing your broken piece.

Tank Flap

Situated in the base of the tank will be a dark or red elastic cone that fits in the gap of the tank. This is the tank fold. On the off chance that you hear water running into the tank and you push down on this fold and the sound stops, the fold should be replaced because it is not working properly.

Remove the tank fold, which is either snared to short posts originating from the flood pipe or held set up by braces.

Replace it with the new fold.

Allow the water to flow through again and re-check for leaks.

Ballcock Diaphragm

The ballcock stomach is a valve that is connected to a buoy. Fundamentally, you will locate a long bar that slides all over on a plastic channel. On the end of this pole is a ball which can be made of plastic or metal. On the off chance that you see or hear water getting through this valve, then it might should be replaced. You can likewise verify whether cleaning it will have any kind of effect before replacing it.

Remove the front of the ballcock, it snaps right off.

Utilize a screwdriver to remove the four fastens holding the top plate place.

Know that the buoy control arm is joined to this part and it could spring stacked.

Evacuate the elastic stomach precisely and verify what sort of condition it’s in.

Presently you can either clean or replace the stomach. On the off chance that you have to flush the valve, you’ll have to turn the water on for a few moments to do so.

Replace the top plate, refill the water and check for leaks one final time.

In the event that neither of the parts appear to be exhausted or if replacing them doesn’t deal with your issue, then it might be the ideal opportunity to give your Gilbert plumbing expert a call! That’s us!

6 Reasons Why You Should Never Ignore a Toilet Leak in Gilbert, Arizona

Most people tend to downplay the dangers of a leaking toilet, although they can be potentially catastrophic if not repaired immediately. A leaky toilet is not just another inconvenience in your home but a major health and safety risk that should be treated as an emergency. This article outlines the dangers why you should locate a good plumber in Gilbert, Arizona immediately you notice leaks from you toilet.

1. A Leaking Toilet is Probably a Loose Toilet
A leak implies that there is some loose connection that is preventing sewage from draining properly. What this means is that such a toilet might topple under the weight of a seated person. This can be potentially dangerous for children, the elderly and the disabled. However, even when you do not have such occupants in your home you should consider the fact that it could injure any user.

2. Health Risk
A leaking toilet deposits effluence belonging to the sewage into your home. Such effluence contains disease causing pathogens that can cause cholera, dysentery, typhoid and a range of other dangerous diseases. Therefore, before you ignore or postpone a leak consider the health risks you are exposing the occupants of your home.

3. Structural Damage
Leaks from your toilet seat or tank is an indication of structural damage in your floor or wall respectively. In order to prevent further damage, that might be costly to repair in future, it is imperative that you repair any leaks as soon as possible. Effluent water makes the concrete on your floor or wall weaker with time and you might have to repair the entire floor or wall if you notice the signs and ignore.

4. Mold
Damp areas in your floor or wall provides the perfect environment for molds to thrive. Molds can contaminate your home and lead to a range of respiratory problems for the occupants.

5. Pests and Insects
Effluent water in your home will definitely attract insects and pests found in sewers. If your ignore leaks from your toilet then you risk pest and insect infestation that might be difficult to deal with if it gets out of hand.

6. Flooding
A small leak left in the toilet can worsen and flood an entire building. This can happen in a case when the leak is connected to a larger water with high pressure which can cause the leak to burst and empty the water from the pipe in your home.

Fixing a leaky toilet should be done as soon as possible to avoid the risks outlined above. However, the repair needs to be handled with an experienced plumber because of the dangers associated.

Plumbing DIY – How To Replace a Seal on a Faucet, Toilet, and More

When it comes to home plumbing you do not have to know everything there is to know about plumbing, just the basics. With just the basic knowledge of plumbing and knowing how to use some tools around the house you can easily replace a plumbing seal on your faucet, toilet, and much more.

 

Plumbing Seal on a Faucet

A dripping faucet is one of the simplest things you can repair in your home. However, a dripping faucet is almost always ignored and never repaired, which can be very costly to you. When your faucet starts to drip, this means that the plumbing seal on the faucet that holds back the water when the faucet if turned off is bad. In order to fix the plumbing seal of the faucet the first thing that will need to be done is shut off the water supply. Once the water supply is off you will want to start removing the faucet by removing the tiny screws that hold it in place. Once the faucet is removed you will then want to remove the screw that holds the washer in place and if the washer is damaged then you will want to replace it with a new and exact matching washer. You will then begin to reinstall the faucet by simply replacing all the screws back into place the same way you removed them. After the faucet has been put back together, go ahead and turn the water supply back on and test your faucet, if there are no drips or leaks, then you have just repaired your dripping faucet with no sweat.

Plumbing Seal on a Toilet

When it comes to replacing the plumbing seal on a toilet this one can be a little messier only because the seal of a toilet is wax and not rubber. You will start off by turning the water supply to the toilet, off and then lush the toilet a couple of times to drank the water from the tank and bowl. Next, you will want to remove the white caps at the bottom of the toilet and remove the nuts holding the base of the toilet. You will then slightly rock the toilet back and forth and break the caulking seal. Once the toilet is removed you can then remove the old wax plumbing seal and replace it with the new wax seal. After you have placed the new wax seal in place, go ahead and place the toilet back in the correct position and sit on it a couple of times to seat the seal and level the toilet. Continue to reinstall the toilet by screwing the nuts back into place and connecting the water supply hose to the toilet. Turn your water supply back on and test the toilet for any leaks. If there are no leaks then you have successfully repaired your toilet.

Most Common Reasons for a Loose Toilet

A common plumbing problem that we encounter is loose toilets. Now, don’t let your mind go to the gutter, I’m actually talking about toilets that move when you sit down, or seem to be unstable when you stand up. These are toilets that are loose, and there could be many reasons why the toilet in your Gilbert home doesn’t seem attached perfectly…

A toilet that rocks back and forth could cause major problems for your Gilbert home bathroom.

Loose Flange Bolts: This is probably the most common plumbing issue with toilets, and the easiest to fix. Check the bolts holding the toilet to the floor. If those bolts aren’t tight, simply grab a wrench and tighten them.

Now, over time, these toilet flange bolts can deteriorate if they are wet, or they can simply lose there effectiveness. If they are broken or have deteriorated, they’ll need to be replaced. This is when you might want to call in a professional Gilbert plumber.

Damaged Flange: The flange is the toilet fixture that mounts the toilet to the plumbing below the floor. This toilet flange can easily get worn and deteriorate over time, particularly if you have hard water. (If you need a soft water system that can help extend the life of your appliances and plumbing systems, give us a call!)

If the flange is damaged, you’ll need to call in a professional Gilbert plumber. Otherwise, if you go DIY, you’ll need to remove all the water in your toilet tank, drain it, lift the toilet from the flange by removing all bolts, then check the seal and flange for any damage.

Improperly Installed Flange: A common problem that lesser Gilbert plumbers might leave you with, or home construction services might leave you with, is a flange that has been improperly installed.

Loose Tiles: Rarely, but on occasion, our C. Slany Plumbers will find loose tiles around the toilet which are causing the toilet to rock back and forth. Our plumbers can replace these tiles as well.

If your toilet is loose and rocking back and forth, don’t wait to fix it. Call C. Slany Plumbing immediately!

Conclusion:

If you have a leaky toilet, or a toilet that just doesn’t fit the needs of your family anymore, it’s time to call C. Slany Plumbing.