Leak detection in your Chandler, AZ home or business can be a bit tricky when you don’t have the advanced tools that your plumber might have, but you can do a few things to try to spot whether or not you have a leak in the first place. You can then try to pinpoint the specific source of the leak, but that can be harder. Try these tips to determine if you have a leak anywhere in your home or building and contact a plumber for more assistance if needed.

home & business leakdetection tips

Check your water meter

Your water meter is the primary method of determining whether you have a leak or not. If you aren’t sure where your water meter is located you can contact the city or a plumber for advice on finding it. First ensure that no water is being used outside or inside of your home or building. Then check if the water meter’s leak indicator is moving. The leak indicator could be a small wheel or a dial depending on the model. If the dial is moving it means that there’s a leak somewhere. There also might be a small wheel that rotates when water is flowing, also indicating that there is a leak.


Check fixtures

Toilets, faucets, and other plumbing fixtures are a common source of leaks. You don’t need leak detection equipment to inspect these areas. Just check for moisture or water accumulating around pipes, joints, and the base of the toilet or sink. Faucets often leak as the result of the rubber washer wearing down, and this can be easy to fix. The toilet flapper valve is a source of leaks as well, and if it is cracked or worn down it is probably leaking and you’ll need to replace it.


Leak detection for underground leaks is trickier

Leak detection for a suspected underground leak can be a bit trickier. This is because the water can accumulate without any visual signs. Look for damp areas in your lawn, or parts of your property that are wet. Check the curb or driveway for water flow. You may need to call a plumber in Chandler, AZ with leak detection equipment to find out if you really have an underground leak.