602-999-1415

If you are ever in the circumstance where you need to replace your kitchen faucet, you can always call a local plumber in Gilbert, AZ to get the job done quickly, or you can do it on your own. If you decide to forgo calling your plumber and handle the task by yourself, the five basic steps for replacing your faucet are below:

 

Step #1 – Shut the water offblog_replacing faucet

The first step is to shut off the cold and hot water supply valves. These values are usually located underneath the sink, or you may call your plumber for advice.

 

Step #2 – Loosen the faucet with a basin wrench

You can use a basin wrench to loosen the nuts that hold the faucet to the sink and the water lines. Use an adjustable wrench to disconnect the water supply lines from the faucet, and you should have several towels available to catch excess water. Put the water lines in a bowl to drain them. If you aren’t sure how to disconnect the water lines, call a plumber in Gilbert for assistance.

 

Step #3 – Scrape the putty from the mounting hole and remove faucet

You will need a putty knife to scrape the putty that holds the faucet to its mounting hole. You may need to use the basin wrench or pliers to remove any remaining mounting nuts that hold the faucet to the sink. Again, a plumber can help with this step if you aren’t sure how to remove it.

 

Step #4 – Clean the sink

Once the old faucet has been removed, you simply need to clean the area to prepare for the new faucet. Any kitchen cleaner will do, or you can use baking soda as well.

 

Step #5 – Install the new faucet or hire a plumber for help

The last step and most complicated step is to install the new faucet. If you aren’t sure how to do this, you can call a plumber in Gilbert for help. If you are able to handle the first steps of removing the old faucet, it may cost you less money to hire a plumber, and a plumber can save you time as well.

 

Installing the new faucet requires you to secure the faucet, tighten the mounting nut, and reattach the water supply lines. A plumber can help you with the water supply line reattachment and help avoid water damage to your kitchen as well.